Company profile

Jin Taiwan company initially was founded at Hsikang Hsiang, Tainan County in 1994 and launched into plastic industrial business. Due to the increase of market demand, we therefore embarked on a new clean room and fully automatic mechanization manufacturing plant at Ho Shun Industrial Park of Tainan City in 2000, and widely expanded our factory plant to 20,000㎡

Jin Taiwan company had three sets of extrusion machine which were imported from Europe when the company were founded in 1994. One of them is specially for PC solid sheet and PC embossed sheet manufacturing and the others are for PVC hollow foaming board and profile manufacturing. In 2000, the company then set up another set of co-extrusion production line for corrugate PC sheet manufacturing to meet enormous demand from domestic and export market. This has been also increased the company’s production ability and flexibility to facing different fields market as well.

In 2005, considering the optical PC sheet(PC film) is now widely applied on the field of the electronic industrial products, therefore, we imported the whole set of extrusion machine from Europe which is specially for producing optical grade PC thin sheet and film and has been already put on mass production. With this, it enables us to widespread supply PC thin sheet and film into different fields such as electronic, computer and optical high technology industrial market. With continuously improvement of production facilities, the company was formally leaded to entering the hi-tech electronic ,optical industry field.

Due to Jin Taiwan embraced the concept of trustworthy and sustained developing to quality improvement, the company’s products has been owned its good reputation in the fields of construction、optical electronic industrial market. Focusing on future, we wish to create a mutual good prospect through consequently research and developing to improve production technique and productivity.

Primary Equipment

Machinery

UNION

BREYER

S.T.C

Imported from Italy.

Imported from Germany.

Researched and Designed by Taiwan

PC solid sheet / PC embossed sheet

PC sheet/PC film

PC corrugated sheet

Clean room introduction
The class of clean room in Jin Taiwan is 10000
particle less than ten thousand per cubic meter in the air)

Vision
Supply optical-grade PC film to the consumer-product manufacturer in the world, we’d developed microstructural
film for LED lighting, welcome to inquire!!

Contact Information
TEL: 886-6-3550505
FAX: 886-6-3550779
E-MAIL : jin@jin-taiwan.com.tw
http://jin-taiwan.com.tw

TYPE I. DIFFUSER WITH ADDITIVES
TYPE II. FOCAL DIFFUSER(FD)

FEATURES
A. Extrusion. Size is larger.
B. Light Efficiency and Uniformity can be adjusted.
C. Eliminate Multiple Shadows Of LED
D. Price is economical.

FEATURES
A. Excellent Light Diffused Effect And 90-95% Of Light Efficiency
B. Eliminate Multiple Shadows Of LED
C. The Ultra Wide Angle Of Light Spreading ±85° (170°)
D. Do Not Change LED Color Temperature
E. Optical Level Of Single Material Polycarbonate, Reusable And High-temperature Resistance

JIN TAIWAN had developed microstructural film for LED lighting, for offering better service to customers,
we'd established "SUN PRO OPTRONIC CO., LTD"

Company Philosophy:

Sun Pro Optronic Co., Ltd. is devoted to the lighting in green energy-saving and provides people more convenient and comfortable lighting environment. We have been developing advanced technology of the lighting, and providing many kinds of high efficiency and non-hurt strong light (glare) of LED lighting solutions for consumers. Our product, FD filmTM could be applied to many kinds of LED lighting products,
such as portable light , desk lamp , down light, etc. That will help every customer enjoys the clean and comfortable lighting of life with mercury-free, non-toxic and non-lighting hurt.

>> More Information http://www.s-pro.com.tw/

LED focal diffuserContact Information
Company Name:Sun Pro Optronic Co., Ltd.
E-MAIL: sun@s-pro.com.tw
TEL:886-6-357-0707
FAX:886-6-355-0779
Address:No.23, Aly. 74, Ln. 36, Sec. 4, Anhe Rd., Annan Dist., Tainan City 709, Taiwan R.O.C.

Website:www.s-pro.com.tw
Skype: sunpro_co
MSN/E-mail:sun@s-pro.com.tw

Main Product:
LED diffuser film
LED indoor lights: LED down lights,LED panel lights,LED bulbs, LED desk lamps, and so on.
LED outdoor lights: solar garden lights, solar lanterns.

公司簡介

1.金台灣公司於1994年創立於台南西港鄉,以PC塑化製品業起家。於2000年因廠房不敷使用而遷至台南市和順工業區,
現廠房土地面積達20,000平方公尺。

2.於1994年創立時自歐洲進口3套押出機出產線,1套PC 生產線專門生產PC 片板和兩套PVC中空發泡生產線。為因應國內外
市場日益擴大的需求,於2000年遷廠後再增加一台PC異形押出生產線,大大的增加了金台灣足以應對各種不同需求的市場
面的靈活能力。

3. 2005年為因應電子及光學行業特殊PC薄膜.板市場需求,從歐洲進口整套光學級薄膜.板押出生產線,全程採用無塵
全自動化機械廠廠房並正式量產,可提供廣大電子.電腦.光學…等高科技產業的各式PC薄膜和薄板之材料; 自此,金台灣
正式擠身入高科技電子. 光學產業之林。

4.金台灣公司秉持著誠信和開發的理念,致力於品質的提升,產品已在建材、光學、電子… 等行業建立起優良的信譽,
希望未來能繼續研發技術與增加產能,共同開創美好的未來遠景。

主要設備

押出機台
UNION BREYER S.T.C.
由義大利進口 由德國進口 台灣自行設計研發機種
無塵室
金台灣的無塵室為Class 10000(每立方公尺空間內空氣中塵粒不超過一萬顆)

願 景

供應光學級PC 薄膜板材給世界消費品製造商、現已開發出LED燈具用微結構擴散膜之產品,敬請洽詢!!

聯絡方式

地址: 台南市安和路4段36巷74弄23號
電話: 886-6-3550505, 3550772
傳真: 886-6-3550779
電子郵件: jin@jin-taiwan.com.tw
網址http: //jin-taiwan.com.tw

PC耐力板(PC採光板)

A. PC 平板 (PC flat sheet)
B. PC 顆粒板 (PC embossed sheet)

概況

採用歐洲全套高科技押出機,配合進口全新正廠PC原料及 含紫外線吸收劑之超耐候 UV PC( 非一般市面之耐候規格)
以積層共擠壓出(CO-Extrusion) 技術製成, 品質優越,對抗紫外線,長效耐候。

特性

I.

具有耐撞擊性,比玻璃更強韌、安全性高

II.

高透光率,可與玻璃及壓克力媲美

III.

可長效抗紫外線,具有良好隔熱效果,可減少空調設備運轉,以節省電費

IV.

隔音: 隔離噪音,提供安靜及舒適的空間

V.

具有自熄性,適用於商業空間,維護公共安全,為最佳採光防火材料

VI.

耐寒性、耐熱性(-40℃~128℃)

VII.

可圓拱、可彎曲,可熱成型:加工性佳、可塑性強

主要應用
建築方面,例如:溫室、採光天幕、遮雨棚、隔音牆、廣告看板、熱成型加工、 鎮暴盾牌、工作母機視窗。

PC耐力板PC平板 PC耐力板PC顆粒板 PC採光板PC平板
PC平板PC耐力板 PC平板PC採光板 PC採光板PC平板

 

 


PC浪板 (PC角浪/PC圓浪)

特 性

I. 耐衝擊性佳,不易斷裂

II.

挺性佳

III.

耐用及耐候性佳

IV.

質量輕,容易安裝施工

V.

防火性佳

VI.

清晰度佳

VII.

顏色多樣化

VIII.

耐寒性、耐熱性( 可達-40℃~128℃)

 
規 格

1) 四溝角浪(圖)
2) 五溝角浪(圖)
3) 小圓浪
4) 中圓浪

 

* 亦可接受各種形狀異形產品訂做
 
主要應用

建築方面,例如:溫室、採光天幕、遮雨棚

PC泗溝角浪五溝角浪 PC小圓浪中圓浪

 

<產品一>擴散劑型擴散板
<產品二>Focal Diffuser Film(FD)

1.製程押出,產品尺寸較大,可廣泛應用於多種產品
2.光效率和均勻性可依添加劑量的不同來客製調整
3.減少重疊影
4.價格實惠
5.材質為PC添加擴散粒子

1. 極佳點光源擴散效果與超高光利用效率
90%-95%
2. 消除多顆LED光源的光紋
3. 超廣角擴散光型控制 ±85° (170°)
4. 不改變LED色溫
5. 可回收耐熱光學單一PC材質

金台灣企業股份有限公司成立-三普龍光電材料股份有限公司來專營LED擴散膜材料與燈具等相關業務,
若是您對FOCAL DIFFUSER(FD)或LED室內燈(LED崁燈、LED層板燈、燈泡、檯燈等等)、太陽能燈具
(太陽能草坪燈、太陽能露營燈)有興趣的話,請與三普龍聯繫,謝謝。

三普龍光電材料公司簡介


三普龍光電致力綠色節能照明,提供符合人類便利舒適的光源環境,以微結構光學擴散膜技術,提供消費者多種高能源效率與無強光害(眩光)的LED燈具解決方案。主力產品─FD FilmTM應用於日常生活中之攜帶式光源、桌燈、嵌燈
(筒燈)、層板燈、燈泡等等各式各樣之LED室內燈具與商用照明,提供高光效、大角度無照明死角以及均勻柔和的
照明環境,不僅保護使用者的靈魂之窗,更幫助每位客戶建立無汞、無毒、無光害之潔淨生活與綠色照明。

>>更多資料可參閱網址:www.s-pro.com.tw

聯繫方式

LED focal diffuser pc film

公司全名:三普龍光電材料股份有限公司
電話:(06)357-0707/357-0505
傳真:(06)355-0779
地址:70969台南市安南區安和路四段36巷74弄23號
E-mail/MSN:sun@s-pro.com.tw

網站:www.s-pro.com.tw
Skype:sunpro_co
統一編號:24360383
專營項目:LED光學擴散膜、LED室內/室外燈具(LED崁燈/筒燈/太陽能草坪燈/太陽能露營燈/層板燈/燈泡/檯燈等等)

聯繫方式

 

地址: 台南市安和路4段36巷74弄23號

電話: 886-6-3550505/3550772

傳真: 886-6-3550779

電子郵件: jin@jin-taiwan.com.tw

網址:http: //jin-taiwan.com.tw

 

 

 

如您對敝司產品有任何疑問的話,歡迎與我們聯繫討論,謝謝!!

PC 薄膜
為台灣地區唯一的電子.光學級PC薄膜.板專用機
金台灣PC薄膜生產製造,採用整套德國PC薄膜專用機,均在10000等級無塵設備環境中生產,
生產過程可精準控制厚度及減少針孔產生,及非常好的表面平坦度及 清潔度。

pc film

特 性
I. 透明性 : 佳 (高透明性)
II. 印刷適性良好,塗佈性佳 : HC.AG.AR
III. 耐燃性 : 達(UL94 VO-V2)級
IV. 加工性 : 易成型、易沖裁切及二次加工等..
V. 尺寸安定性 : 佳(-40℃~125℃內正常使用)
VI. 電絕緣性 : 佳
VII. 耐衝擊性 : 佳(比PMMA約大30倍)
VIII.真空蒸鍍及濺鍍 : 佳


規 格

厚度

規格 ( 寬 mm * 長 M)

重量 KG/捲 (KG/Roll)

0.18 mm

930 * 300 M

60.3 KGS

0.254 mm

930 * 225 M

63.8 KGS

0.38 mm

930 * 180 M

76.4 KGS

0.5 mm

930 * 120 M

67.0 KGS

 

厚 度

規格 (mm)

片/包

(包)片/ 棧板

總重(kg/棧板)

0.5 mm

915*1830

20

(50包)1000 片

1000.0 KGS

1000*2000

20

(50包)1000 片

1200.0 KGS

0.8 mm

915*1830

15

(40包) 600 片

960.0 KGS

1000*2000

15

40包) 600 片

1152.0 KGS

1.0 mm

915*1830

10

(35包) 350 片

1050.0 KGS

1000*2000

10

(35包) 350 片

1260.0 KGS

1.2 mm

915*1830

10

(30包) 300 片

1084.5 KGS

1000*2000

10

(30包) 300 片

1296.0 kKGS

1.5 mm

915*1830

10

(35包) 350 片

1053.5 KGS

1000*2000

10

(35包) 350 片

1260.0 KGS

2.0 mm

915*1830

5

(50包) 250 片

1002.5 KGS

1000*2000

5

(50包) 250 片

1200.0 KGS

*以上是標準規格,亦可接受訂做不同厚度.寬度及長度


主要應用
雪鏡、太陽眼鏡、護目鏡、手機面板、筆記型電腦外殼、安全帽、餐墊、 熱塑成型 (模型
玩具) 、汽車儀表板、銘版印刷(汽車儀表板,逃生指示牌,格板)、真空電鍍反射鏡、化妝鏡
(等安全鏡面)、 遊戲控制器外殼( IMD )、 手機LENS、防護面罩、太陽遮帽、手機外殼
(IMD)等等

pc film pc film pc film
pc film pc film pc film
pc film cell phone panel pc film shell of model of race car PC FILM PANEL
PC FILM PANEL PC FILM SHELL FLEXIBLE PC FILM

 

 

pc film pc solid sheet flat sheet embossed sheet
PC FILM / PC SHEET
PC SOLID SHEET / FLAT SHEET/EMBOSSED SHEET
angular and circular pc corrugate sheet LED pc diffuser led plate
ANGULAR and CIRCULAR CORRUGATED SHEET
LED DIFFUSER FILM
LED DIFFUSER PLATE

 

Contact Information

TEL: 886-6-3550505

FAX: 886-6-3550779

E-MAIL : jin@jin-taiwan.com.tw

http://jin-taiwan.com.tw

 

If you are interested in learning more, please do not hesitate to contact with us.
We are glad to be of your servise!!

 

 

PC FILM

We have the exclusive single-purpose extrusion machine for PC film in Taiwan. The manufacturing of PC film in Jin Taiwan utilize the whole set of professional machine of PC film(PC sheet) from Germany, producing all the product under the serious control of 10000 grade of equipment environment. On the manufacturing process, thickness could be dominated precisely and reduce the appearance of pin hole (particle), maintaining a perfect even and clean on the surface.

PC flim produced by jin taiwan enterprise

Feature

A. transparency

: excellent

B. printing

: printable and even on surface

C. flameproof

: UL-94 grade =>V0~V2

D. manufacturing

: easy to forming, cutting , stamping and secondary-manufacture

E. stability of dimension

: excellent

F. insulation

: excellent

G. Impact

: excellent (30 times better then PMMA)

H. Vacuum electroplating

: excellent

 

Specification

- thickness is below 0.5 mm, packed by roll

Thickness(mm)

Specification (W * L) mm * M

Weight (KG / Roll)

0.18 mm

930 mm * 300M

60.3 KGS

0.254 mm

930 mm * 225M

63.8 KGS

0.38 mm

930 mm * 180M

76.4 KGS

0.5 mm

930 mm * 120 M

67 KGS

 

- thickness is above 0.5 mm ,packed by piece

Thickness(mm)

Specification (W * L) mm * M

Pieces / Pack

(Pack) Pieces / Pallet

Weight ( KG / Pallet )

0.5mm

915*1830

20

(50 Packs)1000 Pieces

1000.0 KGS

1000*2000

20

(50 Packs)1000 Pieces

1200.0 KGS

0.8mm

915*1830

15

(40 Packs) 600 Pieces

960.0 KGS

1000*2000

15

(40 Packs) 600 Pieces

1152.0 KGS

1.0mm

915*1830

10

(35 Packs) 350 Pieces

1050.0 KGS

1000*2000

10

(35 Packs) 350 Pieces

1260.0 KGS

1.2mm

915*1830

10

(30 Packs) 300 Pieces

1084.5 KGS

1000*2000

10

(30 Packs) 300 Pieces

1296.0 KGS

1.5mm

915*1830

10

(35 Packs) 350 Pieces

1053.5 KGS

1000*2000

10

(35 Packs) 350 Pieces

1260.0 KGS

2.0mm

915*1830

5

(50 Packs) 250 Pieces

1002.5 KGS

1000*2000

5

(50 Packs) 250 Pieces

1200.0 KGS

 

Standard specification is as above and customization is allowed.

 

Application

Snow glasses、Sun glasses、eyes protection glasses 、Cell phone panel、Shell of Note Book Comp-uter 、Helmet、Dinning Pad、Thermal forming (module toy)、Panel Printing (Dashboard、Emergency Sing Board、Grid film)、Vacuum plating(Reflecting mirror、Mirror for making up……..Safety mirror)、Game Pad (IMD)、Cell Phone LENS、Protecting mask、Sun-hat with light shelter、Cell phone cover (IMD) , and so on.……………

PC helmet pc film
pc goggle pc film pc film
pc film pc film pc film
pc film pc film

 

 

 

PC SHEET
A. PC flat sheet(PC Solid Sheet)
B. PC embossed sheet

J brand PC is made of top grade virgin UVPC (which contains UV absorber ) and extruded by full line of European hi-tech Co-extrusion machine﹔both ensure the most durable quality, which is UV and weather resistant

Feature

I.

High Impact Strength: More tougher and safer than glass.

II.

High light transmittance:The light transmittance is as good as glass sheet

III.

UV protection :PC Polycarbonate Sheet could prevent transmission of the harmful
UV rays and provide with excellent effect on heat resistant, therefore, the usage of air-
conditionings would be reduced, and so dose the electric expenditure.

IV.

Sound Insulation:Keeping noise away, offering a quiet and cozy space for you.

V.

J brand PC is self-extinguishable, which provide security, beauty and energy- saving, as the best choice for commercial space..

VI.

High Durability(-40℃~128℃)

VII.

Easy to sphere 、bend it and form

Specification
Color : transparency、green、blue、bronze、blue-green
Surface: flat sheet、embossed sheet
Width: 700 m/m∼2100 m/m
Thickness: 1.6 m/m∼10 m/m
Length: 600 m/m∼60 M

Application
Mainly for construction , for example:Green House、Canopy、Sound isulation wall、Advertising board、Thermal forming、Forcing shield for police、Screen panel of machine control and monitor unit.

pc solid sheet pc embossed sheet pc solid sheet pc embossed sheet
pc solid sheet ps flat sheet pc flat sheet pc solid sheet pc solid aheet pc embossed sheet

PC CORRUGATED SHEET

FEATURE

I.

High Impact Strength, hard to broken.

II.

Good uprightness

III.

High Durability

IV.

Light weigh,easy to install

V.

flameproof

VI.

Excellent transparency

VII.

color variety

VIII.

cold resistant、thermal resistant ( range : -40 ℃ ~ 128 ℃ )

 

 

 

 

 

SPECIFICATION

A. angular pc corrugate sheet (4 grooves)
B. angular pc corrugate sheet (5 grooves)
C. miniature circular pc corrugate sheet
D. middle circular pc corrugate sheet

* We also can produce the different shape of surface the customer need.

Application
Mainly for construction , for example:Green House、Skylight canopy、Rain shelter

angular pc corrugate sheet middle circular pc corrugate sheet